Hi I am trying to simulate a 240V AC 50hz power source going through a 50VA transformer to step down to 9V AC and on to a bridge recifier. https://www.circuitlab.com/circuit/vs256r37y4gj/pus/ My circuit does not simulate 9v AC on the transformer secondary. Can someone point out what I have done wrong? |
by Atca
July 27, 2018 |
Try this: V1: Amplitude = 240*√2 =339.41 DCOffset=0 XFMR1: N=V1/V2=26.67 R_SEC and R_PRI=0 |
by wise_zombie
August 02, 2018 |
You will need a ground on the secondary circuit |
by Foxx
December 18, 2018 |
Please sign in or create an account to comment.
CircuitLab is an in-browser schematic capture and circuit simulation software tool to help you rapidly design and analyze analog and digital electronics systems.