12VDC supply from 120VAC - How does it work?

I'm trying to figure out more about exactly how this circuit works, specifically why terminal B responds the way it does.
A 12V zener is being used to generate a 12VDC supply (between terminal A and B in the schematic.) I have run simulations of the circuit to look at V(A)-V(B) and see that this parameter increases a few tenths of a Volt (up to 12V) only on the upswing of V(A) and remains constant on the downswing. I was just wondering why and if it is easy to calculate the behavior?

by sheehansm
March 26, 2013

It's just a confusingly drawn diode pump with a series source resistor to limit the pulsed current drawn from the mains (and to limit the current through the zener):

For a laugh, see what happens if you:

i) remove the zener

and/or

ii) look at the current through R1 as you reduce it.

:)

See also:

https://www.circuitlab.com/circuit/3bqfj6/diode-pump-01-negative-output/

https://www.circuitlab.com/circuit/bww5sc/diode-pump-02-positive-output/

http://en.wikipedia.org/wiki/Voltage_doubler

http://en.wikipedia.org/wiki/Voltage_multiplier

http://www.micrel.com/_PDF/App-Notes/an-1.pdf

http://www.electronics-tutorials.ws/blog/voltage-multiplier-circuit.html

and very closely related because your diodes are operating as switches but with a voltage drop:

http://www.analog.com/static/imported-files/tutorials/ptmsect4.pdf

by signality
March 26, 2013

Zener diode is basically use the broken of voltage and it could be filterized supply send to other components.

by Geoffry
April 20, 2013

Post a Reply

Please sign in or create an account to comment.